Strong Alkaline Water Generator for industrial,improve cleaning and rust prevention process
Strong alkaline electrolytic water has no carbon oil, natural rust prevention function, is a good environmental cleaning liquid, not only decontamination, oil removal, fast speed, but also on the surface of metal parts rust prevention effect, clean water after simple oil and water separation, reach the direct discharge standard, but also reduce the production of environmental pressure of pollution.
As is known to all, in the industrial field, it is necessary to clean the parts and finished products after mechanical processing and remove the oil stains on the surface of the parts. In the past, chemical cleaning agents such as Cunxin sodium or other active cleaning agents were usually used. The active cleaning solution used in the factory, the cleaning and drying process will make the explosive gas diffuse in the air, once met with an open flame immediately cause explosion. And chemical cleaning agent in the cleaning process will produce a lot of waste liquid, direct discharge will bring great pollution to the environment, waste liquid treatment will also increase the cost of enterprises. And sodium is highly corrosive, soluble in water will produce high heat, human skin once in contact with it, will feel strong irritation, cause burns, threatening the life safety of the operator, and traditional cleaning agent after use also need to use water to clean parts again, and super alkaline electrolytic water non-toxic, no corrosion, no smell, not combustible, No pollution to the environment, and has a good decontamination and rust prevention effect, after the use of parts directly drying without cleaning again, not only can simplify the process, save production costs, while maintaining a certain alkalinity and PH value of the condition can be reused, and after the use of the removal of residue can be natural reduction and safe emissions
Strong alkali water equipment using electrolytic process, electrolytic softening water or purified water, forming strong alkali (OH-) ionized water around the cathode, this small molecule ionized water low surface tension, still has a relatively strong permeability at room temperature
The principle of removing oil is: The oil stain is attached to the surface of the material, and the fine water molecules after electrolysis invade the gap between the oil stain and the surface of the material. The hydrophilic H-O-H (alkaline electrolytic water) combines with the hydrophobic H-O (attached oil), so that the oil and water form a molten state. And coated with oil stains electrolytic water negative ions will repel the negative ions on the surface of the material (most pollutant ions have a strong negative potential, and many to be cleaned the surface of the object also has a negative charge), so the oil attached to the surface of the cleaned object will be quickly emulsified and separated from the attachment
Generally speaking, cleaning metal with water will inevitably rust, and another major characteristic of super alkaline water is its rust prevention effect. Super alkaline water has a high REDOX potential, which is attached to the metal surface to form a protective film and play a role in rust prevention. Besides, super alkaline water does not have any corrosion, no harm to the human environment, and waste liquid discharge does not pollute the environment. Can be used for any oil cleaning occasions, its cleaning, safety, economy is incomparable to other cleaning agents. Using ultra-alkaline water to remove oil can greatly reduce the rinsing process, thus reducing cleaning and sewage treatment costs.
After using super alkaline electrolytic water cleaning, dry air is needed to blow away the cleaning liquid and keep it dry quickly, so that the anti-rust effect is stronger. Repeated cleaning needs to remove the dirt residue mixed in the cleaning solution from the cleaning solution to ensure the surface cleanliness of the cleaning parts. When the PH of the cleaning solution is reduced to the set value, add a new cleaning solution to maintain it. After super alkaline water cleaning, there is no need to use clean water rinsing. If clean water rinsing is used, the anti-rust function will be lost
In addition to rust prevention function, super alkali water can also be used as the coolant of cutting and grinding machine, change the oil pollution caused by cooling oil to the workshop air in the past, so that the factory air and use environment can be improved, super alkali water does not contain any carbon element, does not contain any organic matter, so that it is completely free from the restrictions of environmental protection policy, is a real green environmental protection product. And the cost is lower than the traditional cutting, but also have the function of rust prevention
Super alkaline electrolytic water can also be used for military industry, nuclear industry, optical lenses, glass and liquid crystal panels such as precision cleaning, in addition, super alkaline electrolytic water because of its higher PH value, can hydrolyze the protein of pathogenic bacteria and accounting, destroy the normal metabolic function of bacteria, bacteria death, in order to achieve the role of physical sterilization