The disinfection robot uses the robot as a carrier to carry out air atomization and disinfection in the form of diluted disinfectant. According to actual needs, it independently plans the disinfection route,fully automatic indoor unmanned driving, and can perform 360° Dead comer disinfection,1000m2 space can be disinfected in 15 minutes to avoid the risk of personnel infection
Move method:Autonomous route planning
Moving speed:0.1~1m/s
Battery life:5~6 hours under full power
Spray rate:800~3000ML/H
Power Adapter:DC42V 5A
SHC series sterilization and atomization intelligent robot, ultra dry fog spray elimination , 360° all-round disinfection, good dispersion,full coverage. Equipped with full intelligent sensing system, it can sense the surrounding environment in real time, accurately avoid obstacles, and autonomously return to charging pile under low power condition,Separation between man and machine reduces contact between people and effectively reduces the risk of infection
product parameter
| Move method | Autonomous route planning | ||||||||
| Moving speed | 0.1~1m/S | ||||||||
| Battery life | 5~6 hours under full power | ||||||||
| Spray rate | 800~3000ML/H | ||||||||
| Power Adapter | DC42V 5A | ||||||||
| Spray particle size | 2~5μm | ||||||||
| Screen | 7 inch resolution 1024*600 | ||||||||
| Type of battery | 10S8P20800mAh/37V | ||||||||
| Timed disinfection | Set the disinfection time in advance | ||||||||
| Overall dimensions | 450mm(L)*450mm(W)*1360mm(H) |
product display
Autonomous path planning Timed disinfection, Automate tasks Save effort and reduce the risk of infectio
Customize the disinfection target position, a varitety of disinfection modes are available, and the spray disinfection robot automatically performs tasks, saving time and effort
Active obstacle avoidance, After the lidar detects an obstacle, it will automatically go around for stability and safety, The large detection angle of 270°and the obstacle recognition distance of about 1 meter, ensure the stable operation of the robot
Low battery automatic recharge, you can set the minimum battery power of the robot on the APP interface, when the power is lower than the minimum set value, it will automatically return to charging, no manual operation required
Product structure
sope of application
company strength
Submitted successfully
We will contact you as soon as possible
